Verilink FrameStart FSM (34-00299.E) Product Manual Manual do Utilizador descarregar pdf (Página 29)

Web Server Interface 3-5

Figure 3.4

Network Screen

Mode

Selects the network service type.

Values: Long Haul, Short Haul

Default: Long Haul

Line Build-Out (Long

Haul)

Sets the transmit Line Build Out (LBO) for the Long-Haul network interface.

Values: 0, −7.5, −15.0, −22.5 dB

Default: 0 dB

DSX Level (Short

Haul)

Specifies the DTE DSX-1 interface output level.

Values: 0−110, 111−220, 221−330, 331−440, 441−550, 551−660, >661 ft

Default: 0−110 ft

Framing

Selects the framing for the network side of the DSU/ CSU.

Values ESF, D4

Default: ESF

Coding

Sets the network side line coding.

Values: AMI, B8ZS

Default: B8ZS

Timing

Sets the timing source to synchronize the unit’s internal timing generators. In

all cases, slips are controlled to occur on frame boundaries at the Network

port when timing synchronization is lost. Choices are as follows:

Internal − The unit’s internal frequency standard is used for all timing.

Network − Timing is derived from the network recovered clock. (Most

applications use this selection.)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 152 153

Sem comentários

Verilink FrameStart FSM (34-00299.E) Product Manual Manual do Utilizador Página 29