Verilink FrameStart FSM (34-00299.E) Product Manual Manual do Utilizador descarregar pdf (Página 64)

3-40 FrameStart FSM

Figure 3.27

DLCI Table Screen

NOTICE: The DLCI Table and DLCI Details screens are available from the both

the Endpoint Table and the Frame Relay Service Details screens.

SNMP Details Screen

The unit detects and reports T1 network alarms and provides several options

for reporting them, one of which is SNMP traps. When a network alarm

occurs, the unit sends a trap message to as many as eight destinations on your

network. The unit will report each alarm by transmitting an SNMP “trap” to

each non-zero Trap IP address. The SNMP Details screen (Figure 3.28) lets

you configure the SNMP parameters described in the paragraphs below.

Figure 3.28

SNMP Details Screen

Read Community

Accepts a character string identifying the group authorized to perform read

operations. The default setting is “Public.”

Write Community

Accepts a character string identifying the group authorized to perform write

operations. The default setting is “Private.”

Trap Community

Accepts a character string, which is included in SNMP traps generated by the

unit. The default setting is “Public.”

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 152 153

Sem comentários

Verilink FrameStart FSM (34-00299.E) Product Manual Manual do Utilizador Página 64