Verilink WANsuite 7105 (34-00316.C) Product Manual Manual do Utilizador descarregar pdf (Página 179)

VT100 Interface 4-45

If this parameter is set, a PC connected to the LAN interface of this

WANsuite 7105 can reach a remote WANsuite 7105 through this DLCI. The

remote IP address must be part of an IP network that is different from the

local WANsuite 7105, and the local WANsuite 7105's IP address must be

configured into the PC. This way, local and remote WANsuite 7105s can be

reached regardless of the availability of the routers connected at the back of

the WANsuite 7105s.

Values: IP address

Default: 0.0.0.0

Remote IP Mask

If the Remote IP Address is set, the Remote IP Mask must also be set.

Values: IP address

Default: 0.0.0.0

Type

If data received from this DLCI has to be switched to its corresponding

destination port, you must set the type to “Switched.” Set the type to “Local”

if this DLCI will be used for management purposes only.

Values: Switched, Local

Default: Switched

Delete Endpoint

You may delete any endpoint.

Endpoint Service Details Screen

Selecting from the <Svc> column on the Endpoint Table screen displays the

typical Service Details screen (page 4-23) in which you can view, and in

some cases change, parameters including Index, Interface, Type, and Pair. A

Delete Service prompt is also included on this screen.

DLCI Details Screen

The DLCI Details screen (Figure 4.38) lets you access the configuration

parameters described in the following paragraphs. To bring up this screen,

select any DLCI from the <DLCI> column on the Endpoint Table screen.

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 254 255

Sem comentários

Verilink WANsuite 7105 (34-00316.C) Product Manual Manual do Utilizador Página 179