Verilink C100 (880-502893-001) Product Manual Manual do Utilizador descarregar pdf (Página 133)

C100 and C150 SNMP MIB

6/15/99

Verilink C100 and C150 T1/FT1 CSU/DSUs

D-19

The following notes apply:

■

The dsx1LineStatus is a bit map represented as a sum; therefore, it

can represent multiple failures (alarms) and a LoopbackState

simultaneously.

■ dsx1NoAlarm should be set if and only if no other flag is set.

■

If the dsx1LoopbackState bit is set, the loopback in effect can be

determined from the dsx1LoopbackConfig object.

The following values are supported:

dsx1LineLength Object (dsx1ConfigEntry 6)

This variable controls the output power of the T-1 driver on the DSX1

interface. The following values are supported:

133 ft/0dB

266 ft

399 ft

533 ft

655 ft

-7.5dB

-15dB

-22.5dB

dsx1TrunkProcessing Object (dsx1ConfigEntry 7)

This variable represents the trunk processing control. The following

values are supported:

idle

busy

1 dsx1NoAlar No Alarm Present

2 dsx1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm)

4 dsx1XmtFarEndLOF Near end sending LOF Indication

8 dsx1RcvAIS Far end sending AIS

16 dsx1XmtAIS Near end sending AIS

32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm)

64 dsx1LossOfSignal Near end LOS

128 dsx1LoopbackState Near end is looped

256 dsx1T16AIS E1 TS16 AIS

512 dsx1RcvFarEndLOMF Far end sending TS16 LOMF

1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF

2048 dsx1RcvTestCode Near End detects a test code

4096 dsx1OtherFailure Any line status not defined here

1 2 ... 128 129 130 131 132 133 134 135

Comentários a estes Manuais

Sem comentários

Verilink C100 (880-502893-001) Product Manual Manual do Utilizador Página 133

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Verilink C100 (880-502893-001) Product Manual