Verilink T1 ESF CSU (34-00309.B) Product Manual Manual do Utilizador descarregar pdf (Página 17)

Configuration

Power Connection

Plug the connector from the power supply into the unit. Plug the

transformer into an appropriate grounded outlet. This will apply

power to the unit.

Configuration

This section describes the configuration of the T1 ESF CSU.

This unit is configured using DIP switches. Refer to Figure 2-1

for switch locations.

NOTICE:

On power up, each unit is configured to the settings

of the option switches. Changes to the NET LBO and EQ LBO

switches do not take effect until the unit is reset. Reset the unit

by removing power from the unit and then reapplying power. The

loopback switches activate as soon as they are thrown.

Figure 2-1 Verilink T1 ESF CSU

Configuration Switch SW1

Switch SW1 is located on the CSU cover. This eight-position dip

switch provides the following configuration parameters.

(Underlined text indicates default settings.)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Sem comentários

Verilink T1 ESF CSU (34-00309.B) Product Manual Manual do Utilizador Página 17