Verilink T1 Access Router (34-00327) Product Manual Manual do Utilizador descarregar pdf (Página 194)

B-2 T1 Access Router

• rfc2863.mib − describes generic objects for network interface sub-layers

(This MIB is an updated version of MIB-II's ifTable, and

incorporates the extensions defined in RFC 1229.)

• rfc2493.mib − provides textual conventions to be used by systems

supporting 15-minute based performance history counts

• rfc2115.mib − describes the use of a Frame Relay interface by a DTE

• rfc2495.mib − describes DS1, E1, DS2 and E2 interfaces objects

• rfc2011.mib − for managing IP and ICMP implementations, but excluding

their management of IP routes

• rfc2012.mib − for managing TCP implementations

• rfc2013.mib − for managing UDP implementations

• rfc2096.mib − for the display of CIDR multipath IP routes

• rfc2571.mib − the SNMP Management Architecture MIB

The T1 Access Router supports the following Enterprise-specific MIBs:

• ds8200tc.mib − textual conventions used by DS8200 MIB

• ds8200v2.mib − provides T1 configuration and statistics information

• ipadv2.mib − provides Frame Relay, PPP, and Service Aware

configuration and statistics

• ipstart.mib − MIB module for synchronous PPP Monitor

• router.mib − provides configuration of OSPF router

• hdsl2.mib − MIB module for HDSL

• ipaddhcp.mib − ΜΙΒ module for DHCP

• ipadnat.mib − MIB module for NAT

These MIB files may be found on the Verilink Documentation CD included

with the unit.

SNMP Trap Configuration

The T1 Access Router supports up to eight IP destinations for SNMP traps.

These may be configured either through the Web interface or through an

SNMP management application. For configuration of these destinations

through an SNMP management application, use a MIB browser to access the

table trapdest within ipadv2.mib and set the IP addresses of the host

computer running the management application(s). Entering an IP address of

0.0.0.0 will disable the entry.

Generic MIB Loading Instructions

The MIBs were written using the standard ASN.1 notation. Any standard SNMP

manager should be able to compile the MIBs. Although the exact procedure for

1 2 ... 189 190 191 192 193 194 195 196 197

Sem comentários

Verilink T1 Access Router (34-00327) Product Manual Manual do Utilizador Página 194