Verilink 8100A (34-00237) Product Manual Manual do Utilizador descarregar pdf (Página 182)

4-108 8000 Series

Display NAT Local Server Table

When NAT is enabled, you can display the entries in the local server table.

1 To display the table, type “O” on the NAT Configuration menu.

2 Press any key to return to the NAT Configuration menu.

Display NAT Alias Table

When NAT is enabled, you can display the entries in the NAT alias table. To

display the table, type “E” on the NAT Configuration menu. Press any key to

return to the NAT Configuration menu.

Clear NAT Statistics

When NAT is enabled, type “K” on the NAT Configuration menu to clear all

NAT statistics.

Type TCP or UDP

Seconds since use Idle time in seconds for the connection

TCP/UDP Sequence TCP sequence number

Ack TCP ack number

State TCP state number (TCP only)

Retrys: local, foreign: local—TCP retransmissions from local device to foreign

device.

foreign—TCP retransmissions from foreign device to

local device.

Bad checksum: local,

foreign

local—packets with bad TCP checksums from local

device.

foreign—packets with bad TCP checksums from foreign

device.

Report Entry Description

Entry Table entry number

Local IP Address IP address in use

Local Port local port number

Internet Port Internet port number

Protocol The protocol used—TCP or UDP

Report Entry Description

Entry number Table entry number (1 to 7)

Local IP Address Local, or LAN IP address

Internet IP Address Internet IP address assigned

Report Entry Description

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 310 311

Sem comentários

Verilink 8100A (34-00237) Product Manual Manual do Utilizador Página 182