Verilink 8100A (34-00237) Product Manual Manual do Utilizador descarregar pdf (Página 62)

3-12 8000 Series

NOTICE: Some gateways directly support file transfer as a means of upgrading

IADs. For information, refer to the Voice Gateway manufacturer’s

operating manual.

To use TFTP, you must configure both the IAD and the computer that

contains the TFTP Server program, a program for the computer that you

license separately.

Using TFTP Servers via LAN or WAN

Before the IAD can access a LAN or Intranet-based TFTP server, you must

configure the IP address of the Ethernet port (page 2-6) on the same subnet as

your TFTP server, and the IAD must be connected to the LAN.

To access a WAN-based server, you must configure the WAN interface with

a management DLCI or PVC and a WAN IP address. For information about

setting the IP address of the WAN port, see Setting the WAN Port IP Address

on page 2-8 or WAN Configuration Menu on page 4-5.

Copying the Source Files

Typically, you will receive two ZIP files (a core ZIP file and an application

ZIP file) for each upgrade.

First, extract each file into a single directory on your PC. Then, set the

directory as the path that the TFTP Server will use to send files to the IAD

(often identified as upload/download or outbound directory).

Upgrading via TFTP

If your TFTP Server is not running, start it now and note the IP address of the

computer it is running on. To upgrade the IAD software, follow the steps

below.

1 On the Main menu, type “9” to display the Utilities menu (see Figure 2.2).

2 Type “X” to display the File Transfer menu.

Figure 3.5

File Transfer Menu

3 Type “X” to update the entire system (you must use TFTP).

4 Respond by typing “Y” to continue.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 310 311

Sem comentários

Verilink 8100A (34-00237) Product Manual Manual do Utilizador Página 62