Verilink 8100A (34-00237) Product Manual Manual do Utilizador descarregar pdf (Página 42)

2-6 8000 Series

NOTICE: If you are entering the menu to change a previously established

configuration, refer to Managing Configuration Files on page 4-1 to

save the current configuration for fast restoration in case the new

configuration does not work.

Figure 2.2

Main Menu

NOTICE: Options vary depending on the voice gateway selected in the Voice Path

Configure command. Refer to Voice Path Configuration on page 4-60.

NOTICE: When the IAD prompts you for input, the current value is displayed in

parentheses. To conveniently accept the current value, just press Enter.

Setting the Ethernet Port IP Address

Before you configure the Ethernet IP address, you should know the IP address

and subnet mask that are to be assigned to this port. They may be displayed

on the work order, or you may obtain or determine the appropriate IP address

by consulting with the network administrator.

The IAD is shipped with the IP address set to

192.168.1.254 and the

subnet mask set to 255.255.255.0. To configure a port IP address, follow

the steps below.

1 On the Main menu, type “2.” The IAD displays the Router Configuration

menu (Figure 2.3).

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 310 311

Sem comentários

Verilink 8100A (34-00237) Product Manual Manual do Utilizador Página 42