Verilink WANsuite 6x30 (34-00315.B) Product Manual Manual do Utilizador descarregar pdf (Página 104)

4-6 WANsuite 6x30

Interfaces

The WANsuite 6x30 units each have four available interfaces: Network,

Supervisory, Ethernet 10/100, and Serial. The screens associated with each

interface and their associated parameters are shown and described below.

WANsuite 6130 (T1 Interface) and 6230 (E1 Interface) Network

Config Screens

The WANsuite 6130 Network Config screen is shown in Figure 4.5. This

screen lets you view and make changes to the Network interface’s

configuration as described below. In addition, this screen provides a table that

displays error status and alarm thresholds for the Network interface.

Figure 4.5

Network Config Screen

Framing

Selects the framing for the Network side of the DSU/CSU.

Values

ESF, D4

Default:

ESF

Coding

Sets the Network side line coding.

Values:

AMI, B8ZS

Default:

B8ZS

Line Build-Out

Sets the transmit Line Build Out (LBO) for the Network interface.

Values:

−

7.5,

−

15.0,

−

22.5 dB

Default:

0 dB

Timing

Sets the timing source to synchronize the unit’s internal timing generators. In

all cases, slips are controlled to occur on frame boundaries at the Network

port when timing synchronization is lost.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 180 181

Sem comentários

Verilink WANsuite 6x30 (34-00315.B) Product Manual Manual do Utilizador Página 104