Verilink WANsuite 6x30 (34-00315.B) Product Manual Manual do Utilizador descarregar pdf (Página 154)

4-56 WANsuite 6x30

Figure 4.52

Static TCP Translation Details Screen

NAT Ports Screen

The parameters on the NAT Ports screen (Figure 4.53) define the NAT

global/Internet and local/Corporate ports. These parameters are configured in

the NAT Ports Details screen shown in Figure 4.53. Access the NAT Ports

Details screen by selecting the <Ndx> number of the desired port on the NAT

Ports screen and pressing the “Enter” key.

Figure 4.53

NAT Ports Screen

The Endpoint name of the circuit associated with the LAN or WAN port.

Default is LAN for the first port.

Enable

Enables or disables the NAT port. Default is “Enable.”

Default

Forces translation on a specific IP port regardless of the source IP Address. If

Default Translation is set to “Enable,” the packet will never be discarded, but

will always pass through the translation path. Therefore, any packets with a

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 180 181

Sem comentários

Verilink WANsuite 6x30 (34-00315.B) Product Manual Manual do Utilizador Página 154