Verilink WANsuite 6x30 (34-00315.B) Product Manual Manual do Utilizador descarregar pdf (Página 35)

Web Server Interface

3-7

network errored seconds in the previous 15 minutes reaches the preset

threshold for the specified error type, an alarm condition is declared.

The four columns of the status table are as follows:

The table provides error status and alarm threshold information for the

following error parameters:

Sets the Errored Seconds threshold. An ES is a 1-second period in which at

least one logic error occurred. The default value is 45 seconds.

SES

Sets the Severely Errored Seconds threshold.

An SES

is a

1-second period in

which at least 320 Cyclic Redundancy Check (CRC) errors or one Out-of-

Frame (OOF) error occurred.

The default value is 5 seconds.

LOSS

Sets the Loss of Signal Seconds threshold. A LOSS is a

1-second period in

which the T1 received signal is interrupted

. The default value is 5 seconds.

UAS

Sets the Unavailable Seconds threshold. A UAS is a

1-second period in which

consecutive severely errored seconds cause an unavailable state

. The default is

0 (zero) seconds (Disabled).

CSS

Sets the Controlled Slip Seconds threshold. The default 5 seconds.

BPVS

Sets the Bipolar Violation Errored Seconds threshold. A BPVS is a 1-second

period in which at least one bipolar violation occurred. The default is 0 (zero)

seconds (Disabled).

OOFS

Sets the Out-of-Frame Seconds threshold. An OOFS is a

1-second period in

which a frame sync loss occurred

. The default value is 5 seconds.

AISS

Sets the Alarm Indication Signal Seconds threshold. An AISS is a 1

-second

period when unframed all ones are received.

The default is 0 (zero) seconds

(Disabled).

RAS

Sets the Remote Alarm Seconds threshold.

A RAS is generated by the

terminal equipment when an improper signal is received from the facility (or

upon receipt of unframed all ones).

The default is 0 (zero) seconds (Disabled).

Reset Timer

Sets the Reset Timer threshold. This field is the contiguous number of

seconds that an alarm parameter must be clear before the alarm is reset.

•

Status

Displays the current status of the Network port.

•

Alarm

Displays the alarm value of the Network port. The unit

declares an alarm as soon as the count exceeds the threshold

set.

•

Count

Displays the number of events or occurrences of this statistic

that have been detected.

•

Threshold

A read/write field that can be set to a desirable threshold.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 180 181

Comentários a estes Manuais

Sem comentários

Verilink WANsuite 6x30 (34-00315.B) Product Manual Manual do Utilizador Página 35

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Verilink WANsuite 6x30 (34-00315.B) Product Manual