Verilink WANsuite 6x30 (34-00315.B) Product Manual Manual do Utilizador descarregar pdf (Página 106)

4-8 WANsuite 6x30

Sets the Errored Seconds threshold. An ES is a 1-second period in which at

least one logic error occurred. The default value is 45 seconds.

SES

Sets the Severely Errored Seconds threshold.

An SES

is a

1-second period in

which at least 320 Cyclic Redundancy Check (CRC) errors or one Out-of-

Frame (OOF) error occurred.

The default value is 5 seconds.

LOSS

Sets the Loss of Signal Seconds threshold. A LOSS is a

1-second period in

which the T1 received signal is interrupted

. The default value is 5 seconds.

UAS

Sets the Unavailable Seconds threshold. A UAS is a

1-second period in which

consecutive severely errored seconds cause an unavailable state

. The default is

0 (zero) seconds (Disabled).

CSS

Sets the Controlled Slip Seconds threshold. The default is 0 (zero) seconds

(Disabled).

BPVS

Sets the Bipolar Violation Errored Seconds threshold. A BPVS is a 1-second

period in which at least one bipolar violation occurred. The default is 0 (zero)

seconds (Disabled).

OOFS

Sets the Out-of-Frame Seconds threshold. An OOFS is a

1-second period in

which a frame sync loss occurred

. The default value is 5 seconds.

AISS

Sets the Alarm Indication Signal Seconds threshold. An AISS is a 1

-second

period when unframed all ones are received.

The default is 0 (zero) seconds

(Disabled).

RAS

Sets the Remote Alarm Seconds threshold.

A RAS is generated by the

terminal equipment when an improper signal is received from the facility (or

upon receipt of unframed all ones).

The default is 0 (zero) seconds (Disabled).

Reset Timer

Sets the Reset Timer threshold. This field is the contiguous number of

seconds that an alarm parameter must be clear before the alarm is reset.

Applicable values range from 000 through 900. A value of “000” means the

alarm will never be reset.

The Net Config screen provides the user-activated prompts described in the

table below.

CAUTION:

Performance data will be lost upon power cycle or after performing a

Maintenance Reset/Restart.

Prompt

Function

Clear Alarms

Resets the alarm conditions and counts to zero.

Performance

Displays a current count of the number of error events that have

occurred over the past 24 hours and the past 30 days.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 180 181

Comentários a estes Manuais

Sem comentários

Verilink WANsuite 6x30 (34-00315.B) Product Manual Manual do Utilizador Página 106

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Verilink WANsuite 6x30 (34-00315.B) Product Manual